Eastwood has been one of the leading names in rust prevention for many years. Now we bring you twice the corrosion resistance of our original Rust Encapsulator in a simple to apply moisture cure coating. Spray it, brush it or roll it on. It does not matter, just get it on to protect your next project from corrosion. Use to protect or restore car frames, boat trailers, utility trailers, outdoor metal furniture, mailbox posts, bilco cellar doors and more! Looks great or topcoat with your product of choice. Should be top coated in direct sunlight applications. Only 2 quarts required for full size car or truck frame.
Specifications
Matte Black Finish Single component aluminum pigmented coating 67% solids by weight Approximate coverage: 96 SQ FT per quart for one coat 1 coat assures maximum protection Brush, roller or spray applied Paint Gun: HVLP gravity or siphon with a 1.4 minimum needle/nozzle Re-coat able after 4 hrs.- if top coating after 48 hrs., scuff surface with 320 grit paper 2 hrs., tack free Topcoat able with virtually any high-quality coating Maximum service temp of 350�� Fahrenheit
Recommended Substrates and Prep
Apply product as a primer/Encapsulator over clean or corroded (rusted) steel or cast iron Prep surface by mechanically cleaning loose flaking rust with a stiff brush or wire brush/wheel Remove any grease, oils or other surface contaminants with a solvent such as PRE or Acetone Apply by brush, roller or spray
2X Stronger Than Original Rust Encapsulator
Passed over 1,000 hours of salt spray testing
Easy Application Roll, Brush, or Spray directly to metal or apply over rust
Heat Resistant Up To 350 Degrees F
Should be top coated in Direct Sunlight Applications
